Making use of a soda blast gun is great for lots of maintenance projects around your house or company. Soda blast weapon utilizes baking soda (salt, bicarbonate) as its means of cleansing. What you are left with is a paint-free, rust-free as well as smooth surface area. You could soda blast timber, metal, glass, plastic and even concrete. It is an extremely functional device and material. It is also environmentally safe. If you are the victim of graffiti, you are not left with so many choices.
You can paint over the graffiti, however, that also requires time and money. Invest in a soda blast blast device, as well as you could eliminate the graffiti without ruining the surface, and also you will certainly have it on hand for various other projects. The steps below will show you how you can soda blast graffiti from your wall.
Step 1 – Preparation
If there is windows or wood in the wall that you do not intend to hit with sodium bicarbonate, you should cover them with plastic. Do this for any type of surface that you do not wish to refinish with salt bicarbonate. If you have to safeguard something behind the wall, then create a cover for it from plastic set up by steel posts. He will certainly secure the area from the blasting.
Step 2 -Working with the Soda Blast equipment
The tools used for soda blast are not difficult to utilize, it’s made up of 3 components. Each piece of the equipment is equally vital. The canister holds the salt, bicarbonate, the air compressor propels it and the gun shoots out and controls its flow. Turn off all the valves. You will find them on the gun along with the air compressor.
This is just how you maintain the pressure. Connect a tube to the valve on the gun to the valve on the canister, and affix an additional hose from the air compressor to the canister. Fill the canister to the line with the soda, and after that close the lid. To make it airtight, pull the ring which removes excess air, causing an airtight seal to occur. Without the seal, the gun will not work properly, as there will not be enough pressure.
Step 3 Remove the Graffiti
Graffiti is paint, but you do not always want to remove the paint under the graffiti. Set the PSI to 30. This PIS is excellent for removing the graffiti without damaging the wall surface or paint behind it. Turn the compressor on. Open the valve on the nozzle of the gun. When you prepared, pull the trigger. This propels the sodium bicarbonate. Aim it at the graffiti. Adjust your spot as needed, to reach all of it. Inspect the location time to time, as well as proceed as needed. Turn off the soda blast equipment, and afterwards wipe the masonry down with soapy water.
Have Your Graffiti Remove Professionally!